Larger conductive patch on backside of clamshell
Foil strips applied to front of smart watch
Insulated strips on front of smart watch
The insulating tape strips were severed part way and the scrap was moved closer to the end to make a break in the insulation where it can be accessed like a touch sensor. The strips were trimmed and wrapped around the plastic hoop. The touch sensors will not work reliably while the clamshell is closed. This suggests the problem is due to tension via the wooden arcs or stray conductivity. Each of these problems can be addressed. Another issue could be the conduction between the chassis and the switch foil. It may be beneficial to only apply copper foil on the screen but not the side of the smart watch.
4mm breaks in the insulation
Smart watch inserted into clamshell
Foil adhered to plastic loop
Uncropped spinning photo made with Rotational Photography Rig
- Insulate both sides of foil
- Add slack between watch and wooden arcs
- Remove foil from sides of smart watch
- Reduce diameter of plastic at top of plastic hoop
- Repaint plastic hoop
- Clear coat on plastic hoop
The rest of the posts for this project have been arranged by date.
A list showing of all the final posts of COMPLETED projects.
Disclaimer for http://24hourengineer.blogspot.com/
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address email@example.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.