2015-05-12 (Tu) Wind Generator Test Base

Long rubber O-rings were purchased to act as the belt between the pulley included with the electric motor and the printed pulley previously designed. Five plastic rectangles were cut and and drilled to attach to the generator enclosures. The pieces were attached to PVC Ts. Ts were used because they have a surface where a flat plane can be attached. Two screws were put into each plastic piece into the PVC Ts.

Pulleys to be connected by belt

Plastic piece to hold generator

Five motor holders

Originally an elastic strip was going to be cut to length and made into a belt but the thin rubber O-ring provided a simple solution. Since a custom belt wasn't going to be used the distance between the pulleys was very important. A PVC pipe was repeatedly shortened to find a usable size which kept some tension on the O-ring. When the generator and pulley were mounted a spin test was done to ensure the O-ring would ride on the pulleys well and it did. The rest of the fixture was assembled by cutting lengths of schedule 40 3/4" PVC to act as extension arms and stabilizing arms. The angled PVC adapter and the coupler will be the mounting points for the stations.

Long PVC between pulleys

Correct length of PVC and connected pulleys

First test station

Pieces for next four stations

Files for Wind Generator Test Base:
The OpenSCAD file below is not necessary unless you want to change something
 To do:
  • Design electrical
  • Design and write program
  • Build
  • Test for usability
  • Go to next phase and test turbine designs

The rest of the posts for this project have been arranged by date.

First time here?

Completed projects from year 1.
Completed projects from year 2



This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.

2015-05-08 (F)

Comments

  1. Wow! This is one hell of a project. Does it really take 24 hours to complete? How much does it cost to complete the whole project? For those interested in wind generators, I found some resourceful DIY tips here: http://survival-mastery.com/diy/energy/homemade-wind-generator.html

    ReplyDelete

Post a Comment