2016-01-26 (Tu) ESPeri.Impass

Model changes were made so instead of a single place for the grommet to rest there was a track which can fit the grommet in six different positions traveling down the shaft of the spinner. This adjustability should allow a balance to be found where the grommet can keep the spinner from swinging wildly (low) and a place where the neoprene can soften the impacts (high). Once a place is found where the grommet is most effective the  location can be coded into the model. For the second animation the six locations of the grommet are shown occupied by a virtual grommet but it should be noted that the actual neoprene object from the hardware store has a hole in the center.

Sketch of plan for repositioning the grommet

Spinning model

Six different grommet positions
To do:
  • Make handheld haptic compass
  • Make compass work from pocket or necklace
  • Miniaturize
The rest of the posts for this project have been arranged by date.

First time here?

Completed projects from year 1.
Completed projects from year 2



This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.

2016-01-26 (Tu)

Comments