It was a successful day of sanding. Only minor adjustments were needed to keep the sander running and once the adjustments were made it kept working. No parts were added or changed, today was just testing performance and it passed.
Gear, drill, and sander
One thing that was worrisome but turned out to be unimportant was the alignment of the drive wheel. It didn't fit the width of the structure, so a standard nut was added but that threw it off center. The cones on each side of the pulleys kept the belt in line and centered the whole time even during full speed and pulling on the belt during sanding.
The downloadable files have been updated to ensure that the actual files used for printing were listed. Please enjoy.
Side view of sander
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1.
Completed projects from year 2.
Completed projects from year 3.
Disclaimer for http://24hourengineer.blogspot.com/
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address firstname.lastname@example.org becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.