Circuit boards and parts had all arrived so one was constructed. First, a test fit was done with the components to make sure they all fit. If something had been printed to the wrong scale or the wrong part had been used, it wouldn't have fit. Fortunately, everything fit so there was no need to order new parts or redesign the circuit board to fit the existing parts.
Parts needed to be soldered on in a particular order or they would not fit. This was a matter of convenience and a matter of necessity. It would have been impossible to add the Teensy socket if the auxiliary socket had been installed first. It would have been cramped to install the encoders after the Teensy socket. This was partially due to mounting components on both sides of the board.
Downloads:
The rest of the posts for this project have been arranged by date
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Disclaimer for http://24hourengineer.blogspot.com/ and 24hourengineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on a post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2017-07-05 (W)
Top of circuit board
Parts needed to be soldered on in a particular order or they would not fit. This was a matter of convenience and a matter of necessity. It would have been impossible to add the Teensy socket if the auxiliary socket had been installed first. It would have been cramped to install the encoders after the Teensy socket. This was partially due to mounting components on both sides of the board.
Bottom of circuit board
Downloads:
- Arduino code
- OpenSCAD code
- STL printable models
The rest of the posts for this project have been arranged by date
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Disclaimer for http://24hourengineer.blogspot.com/ and 24hourengineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on a post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2017-07-05 (W)
Comments
Post a Comment