2019-04-04 (Th) Electronic Wind Chimes EWC

Ground or 0V was the most typical connection in each of the modules. Every switch needed a ground, and both potentiometers needed a ground connection. Since each module was identical, measurements were taken, and four lengths of wire were cut for each of the remaining modules.
Module with common wires installed

Copying like this was only practical after making sure that the arrangement was suitable and that was done when the IO was tested through the computer. Since everything worked, it made sense to quadruplicate the work into each remaining module.
Remaining modules with common wires

The rest of the posts for this project have been arranged by date.

First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information in this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.