After carrying the enclosure for a couple of days, I wanted to make some changes. One big mistake on the lid was not adding a hole for the USB port to charge it. I also needed taller walls so it would sit flush with the base.
I added a socket for a second motor. I don't know if I'll add another vibrator, but there was no reason not to add the indentation. Both components share a gap for their wires. While I was editing, I made the base thicker and the divots deeper. Last time, I made this change by expanding the Z-axis in the printing software, but it would be repeatable when I did it in the model.
The rest of the posts for this project have been arranged by date.
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2020-07-29
I added a socket for a second motor. I don't know if I'll add another vibrator, but there was no reason not to add the indentation. Both components share a gap for their wires. While I was editing, I made the base thicker and the divots deeper. Last time, I made this change by expanding the Z-axis in the printing software, but it would be repeatable when I did it in the model.
Enclosure screenshots
GitHub repo for Cardinal, aka InCompass
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
2020-07-29
Comments
Post a Comment