2016-11-27 (Su) Clockwork Theremin

Connections for the potentiometer were decided. The available wire colors were arbitrarily chosen for the connections. The connections will have to be maintained on the control side.

Connection list for stereo potentiometer

Wires were soldered to each terminal according to the wiring diagram. No insulation was used on the wires which may be changed later. No dangerous voltage will be seen on this device.

Wired potentiometer

The position of the potentiometer will be a factor of the length of the bolt from the final gear, the mounting plate, the potentiometer shaft and available screw lengths. For the sake of being portable, it would be preferable to keep the potentiometer as close to the gear board as possible.

Parts list:

The rest of the posts for this project have been arranged by date.

First time here?

Completed projects from year 1.

Completed projects from year 2.

Completed projects from year 3.

Disclaimer for http://24hourengineer.blogspot.com/

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.

2016-11-23 (W)