2019-06-29 (Sa) PillarGame

Finding a motor to drive the pillar would turn out to be a lengthy task. It started with a surplus stepper motor and a dual H-bridge driver. Not much information was available about the unit in question, but with four wires, it seemed like it would be a standard 4-wire stepper setup.
Surplus stepper motor and H-bridge

An Arduino Pro Mini was outfitted with headers and connected to the motor driver board. The rest of the evening was wasted trying to establish communication with the board. Sadly, it was lost effort, and the board is probably dead. Luckily, a replacement will be inexpensive.
No luck with this particular controller

The rest of the posts for this project have been arranged by date.

First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information in this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.

2019-06-24

Comments