2020-06-07 (Su) HexShaftMonitor

I didn't apply enough glue to the platen when I printed a cover, so the edges warped burned a little. Burnt edges were the first problem, and I should have looked closer at my print.
Warped copy

The second cover was smaller than my base, so the holes would not line up because I got lost in some old code. I was basing my measurements on a 1/2" shaft, not the 1/4" shaft I am using. I had two options; I could either reprint a base with pillars or make a cover to match the large plate.
Small copy

 I decided to make a new base since this was what my code should have been in the first place, and I liked the look of the compact version. I held the printed parts together, and they fit, but the pieces I programmed with a gap could slide against one another.
Usable models

The rest of the posts for this project have been arranged by date. First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.