2020-11-16 (M) IoTHackDay2020 Cloud Ouija

I revised the servo horn attachment again. This time it had a much larger rod hole, so the skewers were loose. I increased the overall thickness to make it stronger, and the cleats would be easier to use. The printer was clean, which increased the part strength as well, but I think it could use another cleaning.
Old servo horn and new revision

When I added strings for the first time, I was disappointed to find that it didn't matter if they were tense because there would always be slop if the rods weren't snug on both ends. I didn't try rubber bands in place of the strings.
Strung parts and unwanted movement

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.