2021-05-31 (M) Wearable Macro Keyboard BackOfTheHand BotH Finger pressure calibration screen

I wanted to tighten all the finger rod bolts properly.  I knew it would also be critical if they loosened later, so I created a screen that would display the pressure readings as bars going across the screen. For now, I can access it by flipping one of the auxiliary switches, but I will add this function as I create screen menus.

I couldn't adjust a pair of the finger rods properly, and I think it was because my fastening point is flush with the platform, so the thickness of the Velostat and copper tape layers causes it to flare out. I should add a springy layer, like a rubber O-ring, to compensate for the pressure sensing media.
Four simultaneous readings

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.
2021-05-30

Comments