2021-06-16 (W) Wearable Macro Keyboard BackOfTheHand BotH Custom keystems

Two out of the three key-stems I printed were faulty. I confirmed that it fit on a keyswitch and coupled with one of the finger pads. The 10mm stem was a comfortable fit on my pinkie or index finger, and because I could adjust the angle, it was versatile. The 10mm would have been the wrong length for my other fingers, so I created an assortment and labeled them, as shown in the picture. Only two of these prints survived. I need a more reliable way to print them.

Stems with heights

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.
2021-06-16