2021-07-21 (W) 24EngLaserGrid Wiimote teardown

Somewhere in my bins of parts, I have an IR positioning camera from DFRobot. They have been out of stock for a while, but I should be able to scavenge some from old Wii remotes. Since I'm going to have more than four lasers, I'll need several cameras. I opened a controller, and I was surprised at how few components there were on the board. I didn't try to identify them since I was only interested in the camera. The other part I am interested in is the filter at the front that blocks visible light. I will need a hot air station, or similar, to remove the camera.
Exploded Wii remote

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.
2021-07-18

Comments

  1. Thanks for sharing this article. I am looking always engineer and physics concept. It is provides me a knowledge. I want to read aboutpermanent magnet manufacturers. Please to be continue.

    ReplyDelete

Post a Comment