2021-11-18 (Th) EWC_Panel Cutting drum machine faceplate

I started to cut my drum machine faceplate the same way I made the timer panel, where I scored deeper and deeper with a razor knife and dug it out in layers. I realized this would take too long, so I went to my garage, where I kept my Dremel and made a dusty mess. The knife technique worked fine when I only needed three holes, but it would be silly to avoid power tools for this size panel. I started the holes with a rotary blade, then cleaned them up with a spiral saw. A rotary tool was much less work, and I will probably do this even with a couple of holes.
Dusty square holes

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.