2021-12-07 (Tu) EWC_Panel MIDI ports, LEDs and incoming power

I started swapping out the solderless breadboard with my MIDI interface circuit one wire at a time. I tested the data connection when I transferred everything, and it worked perfectly. I put a shrink-wrap sleeve around the circuit board to keep it safe in the bottom of the metal lunch box. I immediately realized that I should connect the incoming 5V wires, outgoing MIDI source connections, and LED panel power wires. I cut off the plastic and soldered a whole lot more. It turned out that the long circuit boards, which I considered trimming, were ideal for connecting power throughout the devices mounted to the box.
All loose wires were tied down

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.
2021-12-07

Comments