I am having fun with my PRandomBeats channels, and I wanted a logo, so I whipped one up in QCAD. I used a couple of joined notes, but I added a zig-zag to the second staff. I think it implies randomness, but it definitely represents a resistor in an electrical schematic. I made a small wooden plaque on my laser cutter. The hardest part was shading the dark parts. I considered using a Sharpie after engraving, but I filled (hatched) the areas with dense lines. If you look closely, you can see there is still plenty of unscorched wood.
The rest of the posts for this project have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address firstname.lastname@example.org becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.