2023-12-03 (Su) EWC_Cyberdeck Faceplate cutting and painting

I cut the faceplate with the laser engraver and tested how the button caps would fit. I had two styles, one yellow and one black, which were slightly different sizes. I alternated colors, which should look nice, but the yellow ones were too snug. I widened the holes slightly with a knife, and they moved freely. I painted black lines at the same angle as the MIDI section, and when the paint dried a bit, I taped them off, added yellow paint, and uncovered the panel to dry.
Painted panel

GitHub repo for EWC_Cyberdeck.

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Completed projects from year 9
Completed projects from year 10

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.
2023-11-30

Comments