2022-07-03 (Su) RangerRogue V0.04 plate

When I tested my laser on the 1.5mm thick wood, I cut some soft basswood that would require at least two layers. I had some birch plates, but that is denser wood. Fortunately, I had no trouble making clean cuts. I revised the shape to fit the coaster-sized samples by removing the wheels, making it shorter, removing the battery mounting area, and expanding the cleats. I'll have to hold the battery above the servos and below the controller in one tall stack. I still don't have a way to mount this to a person.
Coaster-sized Ranger plate

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.