2022-10-24 (M) BackPackPower COMPLETE

I started wiring with the outputs from the adjustable power supply. The banana plugs and barrel connector were wired in parallel so I can attach multiple device and run them at the same voltage. The incoming voltage was a mixture of a 22AWG wire for the ground and one of the accessory wires from my switch panel.
Adjustable power section

I wired the inverter's power wire to another accessory switch and a third for the DC/DC converter. The scooter motor may draw more than the switch can handle, but I can change to a relay if that's the case. I connected a faulty battery that suffered the short, and all my devices powered up. The voltage display on the array showed only 9.59 volts, which is reasonable.
Testing with a weak battery

I installed the standoff bolts and fastened the faceplate to complete the assembly. I planned to paint the faceplate black, but that doesn't seem worthwhile. I didn't do a test fit when I cut the top and bottom panels, yet the unit fit into my backpack well.
Neatly sealed up

When I tested the DC/DC converter, I blew a fuse, so I'll have to rework that circuit. The batteries stood out too far to close the zipper while installed, but I can move those quickly. Despite the issues, this project is complete!
Power on the go

The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.
2022-10-19

Comments