I revised the trigger and front grip to match. The grip features a shroud that covers the trigger's skirt and extends over the keyswitch. The new design is quick to assemble and has a clean look.
I finalized some details with the handle/tagger models and returned my attention to the emitter. I designed it when I did not have a firm grasp of the overall concept. I revised the lens holder to attach to the front of my ABS pipe and hold an LED ring. The model was too large for my printer, but I printed it with the edges clipped.
I gathered the schematic parts I wanted for the tagger. Some of them were not in my library, so I drew them. I mostly stuck to pictorial representations instead of schematic symbols and abstract blocks. I do not like the mixture, but it may help some people with connections since the pin placement is part of the drawing.
I finished the first pass on the tagger schematic, but I should add labels to help identify the components. Some of the parts may be unrecognizable without description.
I modeled an adapter to go between my 30mm scope rings and 3/4" PVC pipes. The outside diameter of the pipes was 26.75 mm, so I offset the pipe to place most of the cushioning at the top and create a sturdy part. I added wings with holes to interface with the scope ring's fastening hardware.
We had seven guests as Sarah organized a show with quiz questions from previous episodes and some about the hosts' cats. The quizzes were fun, and Mr. Fish won the contest, receiving cat stickers as a prize!
The rest of the summary posts have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Completed projects from year 9
Completed projects from year 10
Completed projects from year 11
Completed projects from year 12
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
 |
| Deep grip shroud and shallow trigger skirt |
I finalized some details with the handle/tagger models and returned my attention to the emitter. I designed it when I did not have a firm grasp of the overall concept. I revised the lens holder to attach to the front of my ABS pipe and hold an LED ring. The model was too large for my printer, but I printed it with the edges clipped.
 |
| Lens holder that can mount onto a pipe |
I gathered the schematic parts I wanted for the tagger. Some of them were not in my library, so I drew them. I mostly stuck to pictorial representations instead of schematic symbols and abstract blocks. I do not like the mixture, but it may help some people with connections since the pin placement is part of the drawing.
 |
| Components for the tagger schematic |
I finished the first pass on the tagger schematic, but I should add labels to help identify the components. Some of the parts may be unrecognizable without description.
 |
| Tagger schematic |
I modeled an adapter to go between my 30mm scope rings and 3/4" PVC pipes. The outside diameter of the pipes was 26.75 mm, so I offset the pipe to place most of the cushioning at the top and create a sturdy part. I added wings with holes to interface with the scope ring's fastening hardware.
 |
| Scope ring adapter |
We had seven guests as Sarah organized a show with quiz questions from previous episodes and some about the hosts' cats. The quizzes were fun, and Mr. Fish won the contest, receiving cat stickers as a prize!
Critical Affection: Trivia Madness (1:56)
The rest of the summary posts have been arranged by date.
First time here?
Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Completed projects from year 9
Completed projects from year 10
Completed projects from year 11
Completed projects from year 12
Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com
This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.
All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.
All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.
Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.
This blog, including pictures and text, is copyright to Brian McEvoy.
Comments
Post a Comment