2026-09-05 (Sa) EleKSCo REV05 Interior wiring

The internal switch mechanism, the spine of the project, needed a revision. I narrowed the wire-routing block at the back to save plastic and moved the associated zip-tie block back into place. I later realized my neck for securing zip ties used to be behind the block, but somehow the neck and block switched places, but I kept it since it worked well. I extended the low-voltage wiring groove on the underside to get the wires clear of the circuit. I reduced the high-voltage wire diameter, but I added a new variable for the shrink tube so I could route small solid wires into the area while covered in shrink tube. I added angled holes to the front peg and eliminated the zip-tie fastening points so I could hook wires into place, as long as they are kept from sliding forward. I wired the rest of the internal parts, but I cannot test yet.

Innards wired up

GitHub repo for EleKSco.
The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Completed projects from year 9
Completed projects from year 10
Completed projects from year 11
Completed projects from year 12

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.
2026-09-03