2024-06-05 (W) GrinderCompassMKIII Trying to install a magnet

The print came out marvelously without supports. There was some delamination near the window, but I can reduce that in future prints with an arched hole. I have not found my curing oven, so I solidified the project with a UV flashlight. I tried and failed to get the magnet installed. In all the previous versions, I had enough room to grasp it from both sides while I tightened the bolt on one side. This time, I tried to hold the magnet stuck on the end of a screwdriver bit. The attraction was too strong, and I could not separate them.
Could not seat the magnet

GitHub files for GrinderCompass
The rest of the posts for this project have been arranged by date.
First time here?

Completed projects from year 1
Completed projects from year 2
Completed projects from year 3
Completed projects from year 4
Completed projects from year 5
Completed projects from year 6
Completed projects from year 7
Completed projects from year 8
Completed projects from year 9
Completed projects from year 10
Completed projects from year 11

Disclaimer for http://24hourengineer.blogspot.com and 24HourEngineer.com

This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information on this blog, or linked by this blog, is not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property, or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by  Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.